公司新聞
冷再生機的維修與搶修有什么區別嗎?
來源:http://www.stkehao.cn/ 日期:2022-03-16
冷再生機施工時會產生均勻的較厚鋪層內,不存在傳統施工方法中出現的較薄鋪層間的薄弱界面。因其具備環保、節能等優點而受到廣大用戶的喜愛,同時也可以改善施工條件,減輕經濟壓力,是許多小型施工單位的選擇。
During the construction of cold regenerator, it will produce uniform thick paving layers, and there is no weak interface between thinner paving layers in the traditional construction method. Because it has the advantages of environmental protection and energy saving, it is loved by the majority of users. At the same time, it can also improve the construction conditions and reduce the economic pressure. It is the choice of many small construction units.
對于任何設備來說,想要保證設備的正常運行,是需要進行養護工作的,冷再生設備也同樣如此,不過該設備的養護有搶修與維修兩種情況,這兩種狀態有什么區別呢?下面我們就一起來看一下吧。
For any equipment, maintenance is necessary to ensure the normal operation of the equipment, and the same is true for cold regeneration equipment. However, the maintenance of the equipment can be divided into emergency repair and maintenance. What is the difference between the two states? Now let's have a look.
維修的主要目的在于盡可能使設備保持良好的運行狀態,一旦有工作需要就可以立即進入工作的狀態。而且維修也是有既定的流程要求的,主要可以分為診斷、定位、隔離、修復校正等幾個步驟,而且都需要有一定技能的維修人員來完成。
The main purpose of maintenance is to keep the equipment in good operation as far as possible, and it can enter the working state immediately once there is a need for work. Moreover, maintenance also has established process requirements, which can be divided into several steps, such as diagnosis, positioning, isolation, repair and correction, and all need maintenance personnel with certain skills to complete them.
總的來說,維修其實更側重于是在工作間隙、在設備不工作的時候進行的。
Generally speaking, maintenance is more focused on the work gap and when the equipment is not working.
而如果遇到了比較緊急的情況,再按照平時維修的標準和程序進行修復的話,就會花費很多的時間,會嚴重影響到施工的進度和工期,同時也會降低冷再生機的利用率,這時候我們就需要進行設備搶修工作,以達到讓設備快速恢復工作狀態,保證工程進度的目的。
In case of emergency, it will take a lot of time to repair according to the usual maintenance standards and procedures, which will seriously affect the construction progress and construction period, and reduce the utilization rate of the cold regenerator. At this time, we need to carry out equipment emergency repair, so as to quickly restore the working state of the equipment and ensure the project progress.
以上是對于冷再生機的維修與搶修區別的簡單介紹,希望可以對您有所幫助。我公司是專業的道路施工設備生產廠家,在設備銷售的同時還提供設備的租賃服務,比如說冷再生機租賃、平地機租賃、等等,如果您有相關需要的話,可以致電我公司進行咨詢。
The above is a brief introduction to the difference between the maintenance and emergency repair of the cold regenerator. I hope it can be helpful to you. For example, you can call our company to rent and lease the equipment of the road leveler. If you need the professional service of the road leveler, we can also provide the relevant services.