公司新聞
影響路面銑刨機滑轉率的因素有哪些？
來源：http://www.stkehao.cn/ 日期：2023-09-08
傳統銑刨機租賃后的基本使用工況：
The basic usage conditions of traditional milling machines after leasing:
第一、高速鐵路箱梁表面銑磨、磨平，底板超高面積被銑平作業。
Firstly, the surface of high-speed railway box beams is milled and flattened, and the ultra-high area of the bottom plate is milled and flattened.
第二、混凝土混凝土橋在普通主要防水層表面處理鑿毛的工藝處理。
Secondly, the process of roughening the surface of the ordinary main waterproof layer for concrete bridges.
第三、瀝青路面涌出，出現網裂的情況，坑槽部分及時銑刨干凈。
Thirdly, if the asphalt pavement bursts and there are mesh cracks, the potholes should be promptly milled and cleaned.
第四、在新的瀝青混凝土之前，原路的粉碎和粗糙度。
Fourthly, the crushing and roughness of the original road before the new asphalt concrete is added.
第五、道路線路，油漆工廠地板和完全去除各種熱熔融材料。
Fifth, road routes, paint factory floors, and completely remove various hot melt materials.
冷再生租賃后開始施工時，由于輪胎和涂層之間的正常摩擦，銑床的工作速度越快，其工作速度越快。因此，其使用阻力自然會增加，摩擦會更加嚴重，最后銑床的滑動速度會更高。控制銑刨床的工作速度可以導致控制滑動系數的最終效果。
When starting construction after the cold regeneration lease, due to normal friction between the tire and coating, the faster the milling machine operates, the faster its working speed. Therefore, its use resistance will naturally increase, friction will become more severe, and ultimately the sliding speed of the milling machine will be higher. Controlling the working speed of the milling machine can lead to the ultimate effect of controlling the sliding coefficient.
從理論上來說，增大附著力能夠提高粘著的基本性能，降低滑移損失。但是倘若附著力過大，則會增加輪胎的磨損程度，甚至很可能會造成打滑的現場。因此，適當增加粘著重力能夠在一定程度上減少轉差帶來的損失。
In theory, increasing adhesion can improve the basic performance of adhesion and reduce slip loss. However, if the adhesion is too large, it will increase the degree of tire wear and may even cause slipping on site. Therefore, appropriately increasing adhesive gravity can to some extent reduce the losses caused by slip.
本文由冷再生機租賃供技術支持，更多的詳細精彩內容請點擊我們的網站http://www.stkehao.cn我們將會全心全意為您提供滿意的服務。
This article is provided for technical support by leasing cold recycling machines. For more detailed and exciting content, please click on our website http://www.stkehao.cn We will wholeheartedly provide you with satisfactory service.
公司地址：濟南市槐蔭區經一路273號群盛華城2號樓1-404
公司名稱：山東途暢路橋工程有限公司 
備案號：