公司新聞
冷再生機道路維修特點有哪些？
來源：http://www.stkehao.cn/ 日期：2021-05-26
冷再生機在道路施工要求是非常高的，是要達到其結構壽命時就會產生深層裂縫、坑洞及擁包等損壞，從而導致道路使用性能的嚴重下降。作為一種經濟性的道路維修改造方法，就地冷再生的主要優點是百分之 百地利用舊材料使現有鋪層得到加強，加強需要進行基礎的打牢，其次有工期短、對公共交通干擾小等優點，而且與其他維修方法相比，就地冷再生的成本會大大的降低很多，從而節省更多的人力，物力！
The requirement of cold recycling machine in road construction is very high. It will produce deep cracks, pits and other damage when it reaches its structural life, which will lead to the serious decline of road performance. As an economical method of road maintenance and reconstruction, the main advantages of on-site cold recycling are to make full use of old materials to strengthen the existing pavement, strengthen the need to lay a solid foundation, and then have the advantages of short construction period and small interference to public transport. Moreover, compared with other maintenance methods, the cost of on-site cold recycling will be greatly reduced, So as to save more manpower and material resources!
冷再生機施工的時候，都是具有針對性的，還一直采用修新路用的傳統設備，以傳統的重建方式進行。盡管這種方法可以保證質量，但顯得過于笨重、工期過長，特別是不能不斷交施工。更由于不能充分利用現有路面材料，不僅成本很高，也不環保。由于環保及經濟的原因，盡可能多地利用現有路面鋪層材料進行道路維修。
Cold recycling machine construction, are targeted, but also has been used to repair the traditional road equipment, in the traditional way of reconstruction. Although this method can ensure the quality, it is too cumbersome and the construction period is too long, especially the continuous delivery of construction. Moreover, due to the failure to make full use of the existing pavement materials, the cost is not only high, but also not environmentally friendly. Due to environmental and economic reasons, the existing pavement materials should be used as much as possible for road maintenance.
冷再生機施工的時候，首先是根據現有路面銑刨到確定的深度，以便獲得現有鋪層材料。然后，通過加入粘結劑對這些材料進行再生處理，從而獲得一個得到加強的新鋪層。整個再生過程是一個一次性的過程。現在，已經有成熟的集現代工程機械新技術于一身的再生機械，現在，就地冷再生作為一種舊路維修改造方法，已經在世界上許多國家得到廣泛承認。這一工藝適用于維修或升級改造從無鋪面的礫石路，到承受重負荷的干線公路的大范圍的道路。
During the construction of cold recycling machine, the first step is to mill to a certain depth according to the existing pavement, so as to obtain the existing pavement materials. Then, these materials are recycled by adding binder, so as to obtain a strengthened new layer. The whole regeneration process is a one-time process. Now, there is a mature set of modern construction machinery in a new technology of recycling machinery, now, cold in place recycling as a method of old road maintenance and transformation, has been widely recognized in many countries in the world. This technology is suitable for the maintenance or upgrading of a wide range of roads from unpaved gravel roads to trunk roads with heavy load.
以上是關于冷再生機道路維修的一些特點，大家如有跟多的疑問歡迎到我們公司咨詢。
The above is about some features of cold recycling machine road maintenance, if you have more questions, welcome to our company for consultation.
公司地址：濟南市槐蔭區經一路273號群盛華城2號樓1-404
公司名稱：山東途暢路橋工程有限公司 
備案號：